Type 13F3
Composition |
- Sleeving of glass plait (400° C)
- Polyurethanic paint (155° C)
|
Thermal properties |
- Working Temperature: class F 155° C, peaks at 170° C
- The fireproof glass plait guaranteees the insulation at 1000 V, before impregnation
- The 13F3 sheath does not propagate the flame
- It tolerates weldings.
|
Electrical properties |
- Nominal voltage: 500 V.
- Breakdown voltage at 100° C Max. 3000 V.
|
Chemical properties |
- Good waterproof characteristics and resistance to steam and to all corosive and climatic agents normally found in electrical constructions
- Good resistance to oils and good adhesion to all classical paints in class F.
- The F13 steath is not attacked by mildew and mushrooms
|
Mechanical properties |
- Good paint elasticity
- Good resistance to bendings and repeated stresses
- Excellent resistance to ageing
|
Applications |
- Insulator for motors and rotating machines class B (130° C) and class F (155° C)
- Transformers
- Electrical and electronic constructions
- Wirings of white goods and heating machines
- Radiators
- Converters
- Armature wirings for electrothermal machines for processing of plastics and rubbers
- General insulation for temperature up to 170° C
|
Packaging |
- diam. 0.5 to 3 mm., 200 m. skeins
- diam. 4 to 12 mm., 100 m. skeins
- diam. 14 and other, 50 m. skeins
- throwaway or recyclable colls upon request
- chopped according to Customer's specification
- Other diameters, colors, electrical and mechanical characteristics upon request
|
Color |
- yellow (on stock)
- red
- black
- green
- other colours on request (5000 meters min)
|
Type 21C - 21F
Composition |
- 21C - Plait of glass wire impregnated with white siliconic paint
- 21F1 - Plait of glass wire impregnated with black siliconic paint
|
Thermal
properties |
- Working Temperature : 200° C, peaks at 350° C.
- The sheath is totally fireproof
- It tolerates weldings
|
Electrical properties |
- Breakdown voltage at 100° C: 800 - 1000 V.
|
Chemical properties |
- This sleeving withstands most chemical products
- It supports impregnation of all classical paints in class B and F.H.
- It cannot be attacked by mushrooms and mildew
- This impregnated sleeving is not waterproof
|
Mechanical properties |
- Flexible sheath
- Good resisteance to bendings and repeated stresses
- Avoid rubbing on metal corners
|
Applications |
- Wirings for white goods
- Radiators
- Converters
- Irons
- Industrial wirings
- Electrothermal machines for processing of plastics and rubbers
- Ovens
- Stoves
- Driers
|
Packaging |
- diam. 0.5 to 3 mm., 200 m. skeins
- diam. 4 to 12 mm., 100 m. skeins
- diam. 14 and other, 50 m. skeins
- throwaway or recyclable colls upon request
- chopped according to Customer's specification
- Other diameters, colors, electrical and mechanical characteristics upon request
|
Color |
- white
- black
- Blue on request
|
Type 15C
Composition |
- Wire plait of glass (400° C)
- Silicone rubber (250° C)
|
Thermal properties |
- Working Temperature -60° to + 200° C, peaks at 280° C
- The fireproof glass plait guaranteees the insulation at more than 280° C,before soaking with the silicone rubber.
- The sleeving does not propagate the flame
- It tolerates weldings very well
|
Electrical properties |
- Nominal voltage 500 V
- Breakdown voltage after 10 hours at 90% of relative humidity:
15 C1,5 : 1000 to 1500 Volts Red color 15 C2,5 : 2000 to 3000 Volts Red color 15 C4 : 1300 to 4000 Volts Red color
|
Chemical properties |
- Watertight, withstands steam, alchaline, saline and ozonic solutions, UV Radiations, Acetone, Alcohol, Ether, Fats
- It tolerates sprinkles of hydrocarbons and mineral oils
- It cannot be attacked by mushrooms and mildew
|
Mechanical properties |
- Very flexible sheath with an excellent resistance to bendings
- Withstands very well vibrations and strong stresses
- No problems with high temperatures
|
Applications |
- Insulator for rotating motors and machines class H ( 180° C) and class C (220° C) .
- Transformers
- Wirings for electrical and electronic constructions undergoing extreme temperatures
- White goods and heating devices
- Oovens, heaters, measurement control and adjustement equipement
- Irons, welders
- Ideal insulating element for lampholders and other equipement for illumination
|
Packaging |
- diam. 0.5 to 3 mm., 200 m. skeins
- diam. 4 to 12 mm., 100 m. skeins
- diam. 14 and other, 50 m. skeins
- throwaway or recyclable colls upon request
- chopped according to Customer's specification
- Other diameters, colors, electrical and mechanical characteristics upon request
|
Color |
- yellow (on stock)
- red
- black
- green
- other colours on request (5000 meters min)
|
Type 15C UL RATED
Composition |
|
Thermal properties |
- Operating temperature: -60° +200° C.
|
Electrical properties |
- Nominal voltage 600 V
- Average breakdown voltage
- before thermal aging: 10400 V
- after 7 days at 265 °C : 12800 V
- after 60 days at 265 °C: 12800 V
|
Chemical properties |
- Humidity resistance: after 336 hours at 70° C. no softening
- Resistance to hydrocarbons:
- after 96 hours at 100° C in ASTM oil no. 2: 16000 V
- after 1440 hours at 80° C in ASTM oil no. 2: 16200 V
- Excellent resistance to impregnation varnishes and resins
|
Mechanical properties |
- Cold bend test: after 1 hour at -30° C no cracks
- Peak tempeerature: withstands perfectly well several hours at 265° C
- Self-extinguishing VW-1 (sleeving in vertical position)
|
Applications |
- Ideal thermal and electrical insulating material for points and appliances operating at high temperatures with thermal overcharges.
- Combines the good mechanical resistance of fiberglass braid with the flexibility, chemical stability and dielectric strength of silicone elastomer
|
Packaging |
- diam. 0.5 to 3 mm., 200 m. skeins
- diam. 3.5 to 10 mm., 100 m. skeins
- diam. 12 to 20 mm., 50 m. skeins
- diam. 22 to 25 mm., 25 m. skeins
|
Color |
- black
- white
- redbrown
- other colors on request
|